Rev.05242021JA
wwww.elitescreens.com
5
2.
RF Remote control:
The RF remote does not require line-of-sight and can be used to control the screen from
anywhere up to 50 ft.
3. 12 v trigger:
The built-in 12V trigger input allows your screen to synchronize its rise & drop with the projector’s
power cycle. The screen rises when the projector powers up and will retract when the projector powers down. The
12-volt RJ11 cable connects to your projector’s trigger output via a separate cable such as a 3.5 mm mono that may
or may not be provided by the manufacturer of the projector. The trigger feature will not work without an output
cable from the projector, but it can be tested by connecting the Red (+) and Green (-) cable to a 9-volt battery. A
3.5mm mono jack cable is needed to splice together with the 12v trigger cable for this feature to work.
Note: Not all projectors have a trigger output port for this feature.
Storing the screen
: Always store the screen flat horizontally. Never store the screen in a vertical position.
For Technical Support or an Elite Screens contact in your area,
UP
STOP
DOWN
Press the
UP
button to Raise the screen
Press the
STOP
button to stop the screen
Press the
DOWN
button to Retract the screen
Connects to projector
trigger output 3.5 mm
mono jack cable
(not included)
12v trigger connects
to screen RJ11 port
