Rev080515
www.elitescreens.com
5
8.
Affix the top edge (Velcro) of the curtain to the inner edges (front, left and right side edges) of
the storage case.
Note
:
The curtain will stick to the Velcro inside of the case.
Controls and Accessories for Kestrel Stage Series
A. IR Remote
B. RF Remote
C. 3-way Wall Switch
D. 5-12 volt trigger cable
E. IR extended “eye” receiver
F. AAA batteries
G. Bubble leveler
Screen Control System for Kestrel Stage Series
Electric Current information
: The screen operates on AC110V @ 60 Hz
1. Plug the screen’s power cord into a power outlet.
2. Once the screen has power, you’ll be able to control it using any of the 4 methods
described below.
4 Ways to Control your Kestrel Stage Series
1)
IR remote control (Item A) and IR “Eye” Receiver
(
Item E) :
The IR remote control (fig.1)
requires line-of-sight to the IR sensor. The IR “eye” receiver must be connected to the
Remote Control Wall box in order for the IR remote control to function. The IR “Eye”
Receiver plugs directly into the screen’s RJ-45 input (fig.2).
The shaded area in this figure
indicates the location of the
Velcro inside of the box.
