Rev090618
ELITESCREENS.com
4
2)
RF Remote Control
(
Item B
): The radio waves eliminate the need for a direct line of sight
with a range of 100 feet.
3)
3-Way Wall Switch
(
Item C, Fig 3
): The 3-way wall switch manually controls the screens
up/stop/down button by connecting directly into the screen’s RJ-45 port
.
4)
5
-12 volt trigger
(Item D, Fig 4):
The built-in 5-12V trigger input allows your screen to
synchronize its drop & rise with the projector’s power cycle. The screen deploys when the projector
powers up and will retract when the projector powers down. The 5-12 volt RJ45 cable connects to
your projector’s trigger output via a separate cable that may or may not be provided by the
manufacturer of the projector. The trigger feature will not work without an output cable from the
projector, but it can be tested by connecting the Red (+) and Green (-) cable to a 9-volt battery.
For local Elite Screens contact or Technical Support, please visit
ELITESCREENS.com
3 Way Wall Switch
(does not have IR sensor)
Fig.3
Fig.4
