Operation
Remote Control System:
Line switch
: This is the switch that is connected with the power cord. It
has three positions as shown below. Rise, stop, and drop.
Remote Control
: This is the hand control that can be carried with you. It
has three positions. Rise, stop, and drop.
Switch operation
: Always press the “stop” button first, then press “rise”
or “drop” as needed.
Malfunction
If the electric screen does not move, please check the following:
1. Check the power supply and fuse first. The screen will not move without power.
2. Make sure the power cord is plugged to the power outlet.
3. Check power connections to see if it may be disconnected.
4. Make sure the switch is in the normal and right position. The screen will not
move if you press the up button when it is at its highest postition, nor will the
screen go any lower if it is already at it’s lowest position.
5. If the screen works well with the line switch but not with the remote control,
please make sure the control has batteries or replace them with new ones.
Contact info:
, Inc
15012 Red Hill Ave, Suite D
Tustin, CA 92780
Tel: 714-258-7158
Fax: 714-258-7157
www..elitescreens.com
Rev. 1.1
