1. 12V Trigger
:
12V trigger for your new Elite
Cinetension-----allows your screen to
synchronize its drop and rise with the
projector's
power cycle. The scree
drops when the projector powers up ,
and retracts when the
projector
powers
down.
3. Bubble Level:
Included with the installation package is a small bubble level that can be useful in
determining if the screen is perfectly level when installing.
NOTE
:
①
②
Please use the Down sign side as the bottom.
The Bubble should be in the middle position to determine that it is level.
2. IR (Infrared) Wall Box Kit and Eye Receiver:
The Wall Box Kit contains an IR receiver
and enables the consumer to use either the IR remote or hardwire controls to operate the screen's drop/
rise capabilities. IR eye protrudes from the bottom of the casing to present a low profile line-of-sight
control option for your IR remote. It is a low-visibility alternative to using the wall box kit and its ability to
protrude from the bottom of the screen allows line-of-sight control even in a recessed ceiling installation.
Video Projection Interface
Red DC12V
Green 0V
To Projector
Connection pins
inside of case
Connection pins
inside of case
Wall-mounted Receiver
(Extension Sensor)
Transmitter
Connection pins
inside of case
Sensor
Sensor
Bubble Level
www.elitescreens.com
