V051616-EA
www.elitescreens.com
8
Support bar installation (for models 180” and above)
:
1.
Position the
center support bar (E)
and
M6
hex screws (G)
in the areas of the frame
shown in fig 1. Align the hole on each end of
the support bar with the
M6 hex screws (G)
located at the top and bottom frame sections.
Then fasten with the
M6x12 screws (I).
2.
Position the
Corner support bars (N)
and
M6 Hex screws (G)
in the areas of the frame as shown below
in fig 2. Align the holes on each end of the corner support bars with the M6 hex screws located on the
vertical and horizontal frame sections. Then fasten with the
M6x12 screws (I
).
Center Support Bar
Align the M6 Screws with
the two holes located on the
Center Support Bar.
Corner Support Bar
Align the M6
screws with the
two holes on the
Corner Support
Bars.
Figure 1
Move the
M6 hex screw (G)
to these areas of the frame.
Figure 2
