07282020JA
3
Frame Assembly
Step 1
. Place a soft-clean cloth on the
ground or other flat surface of the area
where the screen will be assembled.
Step 2.
Position the pieces of the frame
face-down on the soft-clean cloth in the
arrangement shown below.
Step 3.
Insert the
Center Joint (A)
connectors into one-half of the horizontal frame and secure with 4
(M5x10mm)
screws. Once secure, connect the other half of the horizontal frame and fasten with 4 more
screws.
Step 4.
Connect the
Elbow Joints (C)
to top and bottom sections of the vertical frame. Once inserted,
connect the vertical sections to the horizontal frame sections.
Make sure all the holes are in alignment and the frame pieces are
flush (no gaps). They should form perfect right angles.
NOTE:
Do not tighten elbow joints completely until all
frame pieces are
assembled correctly.
Center Support Bar Installation
Step 1.
Two people are suggested for this step.
Place the
Center Support Bar (I)
into the top
groove of the back of the frame.
Step 2.
Next, slowly push and slide the opposite
side of the center support bar towards the center
as shown below.
Step 3.
Using the
(M4x10)
screws, screw both
ends of the center support bar and make sure it
is secure.
A
A
C
C
B
B
Joint
insertion
channel
