JA10302020
U-00195
7
Edge Trim Installation
ATTENTION: THE TOP EDGE TRIM PIECE WITH THE LOGO SHOULD BE INSTALLED ON THE TOP.
Step 11
: Place the edge trim frame pieces over each end of the frame.
Connect edge trim frames (
e/f
) together using the
M4
center joint (e)
and secure with four of the
M4x4 screws (m)
as show in
Step 1
. Repeat for other side.
Once both top and bottom edge trim frames have been connected, attach the vertical (left/right) sides edge trim
frames (
d
) using the
elbow joints
(
f
) and secure with four
M4x4 screws
(
m
) on all corners,
Step 2
.
Step 12
: Install the
angle cover
(
n
) on each corner of the frame using the
M4x4 screws (m)
.
Note: The angle cover screws holes align with the screw holes on the elbow joint.
1
1
2
2
2
2
f.
m
e.
m
.
o.
Peel off the double-sided tape.
