Rev.02142022KP
3
B. Preparing the tripod screen for projection:
Follow the steps below and Fig. 3.
1.
Pull the screen handle up vertically and hook the screen handle on the
Top Hook
.
NEVER PULL THE SCREEN MATERIAL TO RAISE IT.
2.
Push/press the
Vertical Locking Tab
to unlock the current
position of the
Vertical Extension Bar
and raise it with another hand.
Remain pushing on the button until you reach the desired height and
let go until you hear a click sound which indicates it is locked in place.
3.
Push/press the
Screen Height Adjustment Lock/Release
located
just above the
Carrying Handle
to raise or lower the bottom of the
screen. Once the desired height has been set, let go of the tab to lock
the position in place.
C. Tripod Skirt Installation
4. Unfold the tripod skirt in a clean area. Use the magnetic bars to attach it to the tripod case.
Fig. 3
1
2
3
Note:
Use the Keystone Eliminator to prevent “Keystone Effect”
from occurring. Keystone Effect is caused when a projector
presents its image at a downward angle causing a trapezoid-shaped
image to appear on the screen. The Keystone Eliminator is
designed to eliminate that effect by sloping the screen forward.
