U00258
1
Manual Tab-Tension Pro Series | CineGrey 5D
®
Ceiling Ambient Light Rejecting
Manual Pull-Down Projector Screen
User’s Guide – M Type
V1.0
Thank you for choosing the
Manual Tab-Tension Pro Series
projection screen! This tab-tensioned
manual screen is best for rooms with minimal control over room lighting. It utilizes our GREENGUARD
GOLD® and ISF Certified
CineGrey 5D®
front projection ceiling ambient light rejecting material. It is
precisely formulated to increase brightness, produce accurate colors, and improve contrast. The
CineGrey
5D®
is best for family rooms, educational facilities, conference rooms, house of worship or any
applications in which incident light is a factor.
Compatible only with standard throw projectors.
In order for the CineGrey 5D® to maintain its projection qualities and optimum performance please
refer to the list below for proper maintenance and cleaning.
• Use a dry microfiber cloth to remove dust from the screen’s surface.
• When cleaning, use a damp microfiber cloth with warm water to remove any marks.
• Never rub or apply pressure when cleaning the surface.
• Never attempt to use any solutions, chemicals, or abrasive cleaners on the screen surface.
• To avoid damaging the screen, avoid touching it directly with your fingers, pens/pencils or any
other sharp or abrasive objects.
Please be sure to read the precautions and operating instructions carefully before operating the screen.
Proper maintenance and handling will ensure a longer lifespan of the product.
Note:
Wall screws included with this product are complimentary and may not be adequate for all mounting
surfaces. Consult with a professional installer or hardware store for proper mounting screws and anchors.
Regardless of the mounting method, the screen should be securely supported so that the vibration or pulling on the
viewing surface will not cause the screen case to become loose or fall. The installer must ensure that proper
mounting hardware and the fasteners used are of adequate strength and suitable for the mounting surface.
Hardware Parts List
Please make sure all parts listed below are included before proceeding with the installation.
A. Wall Bracket B. Eyebolt C. 5x50 Wall
Screws
D. Drywall
anchors
E.M5 Nut F. M5 Screws G. Snap link
H. Bracket
connector
Item
Part List
106” Screen 125” Screen 140” Screen
A
Wall Bracket
2
2
3
B
Eyebolt
2
2
3
C
5x50 Wall screws
4
4
6
D
Drywall anchors
4
4
6
E
M5 Nut
2
2
3
F
M5 Screws
4
4
6
G.
Snap link
2
2
3
H.
Bracket connector (installed on housing)
2
2
3