09252018-JA
www.eliteproav.com
1
Pro Frame Series
Fixed Frame Projection Screen
User’s Guide
Thank you for choosing an Elite ProAV fixed frame projection screen! Please read through this user guide before
utilizing the screen. Correct usage and maintenance will ensure a long product life.
Care & Use Instructions
：
Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the
points below to prevent that from occurring:
▪
Do not
touch
the projection surface with your hands
▪
Do not
write or draw
on the projection surface
▪
Do not use fingers or sharp objects to point on the projection surface; this will damage the screen material.
▪
Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.
▪
Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.
Hardware and Parts List
Please make sure all parts listed below are included before installation.
A. Elbow joint x4 pcs
B. Top/Bottom horizontal framex4 pcs
Left/Right vertical frame x2 pcs
C. M6*30 Screws x8 pcs
M5 allen wrench x1 pc
D. Center joints x2 pcs
E. Wall brackets x4 pcs
F. Screws for support bar x1-2pcs
G. Center support bar x1-2 pcs
H. Retention clips x1 bag
I. Connectorx5 pcs
J. M5x50Screw and anchor x6-12pcs
J. Screw and anchor x 8-12 pcs
（
2
）
K. M6*10 screw x12pcs
L. Screen Material x1pc
M. Fiber glass rod x 6 pcs
(4 top/bottom rods + 2 side rods)
N. Rubber mallet x 1 pc
O. Phillips screwdriver x1pc
