11152019-JA
4
Screen Material
Please read this important note before proceeding with the installation process of the material.
Step 7:
Put on the
white gloves (m)
and carefully unroll the screen material on a clean surface from the roller to
the other side as shown below. The back side of the screen material should be placed upwards.
Step 8:
Insert
the fiberglass rods (n)
through the openings. The longer rods are used on the vertical edges of the
screen material, and the shorter rods are used on the horizontal edges, as shown below.
Step 9:
Carefully and gently place the assembled frame on top of the screen material. Make sure to not allow
the angle edge of the frame to come in direct contact with the screen material to avoid puncturing it.
Note:
Make sure all of the corners of the frame are aligned according to the markings on the back of the
material as indicated below.
Fiberglass rods
Openings
Back Side
Before handling the CLR® material, put on the supplied pair of white gloves to avoid leaving fingerprint
marks, dust or hand oil on the material’s surface. The CLR® material is very delicate and should be
handled with extreme care. Do not allow the material to fold or bend. Failure to follow instructions will
result in permanent damage to the screen material, which is not covered by warranty.
Front
