6 Questions? We’re here to help!
Visit: shopelitegourmet.com for support on this product.
BEFORE FIRST USE
1. Unpack the appliance and all parts. Remove all packaging
materials, including any stickers or labels.
2.
Before the first use, please check if all the parts of the
appliance are in good condition. If not, please contact the
seller or manufacturer.
3. Wipe down the exterior with a soft dry cloth.
4. NEVER IMMERSE APPLIANCE OR CORD IN WATER OR ANY
OTHER LIQUID.
5. Position the coffee maker on a stable, dry, level,
heat-resistant surface near an electrical outlet.
6. Unroll the electrical cord.
7. Operate the coffee maker on a separate outlet and circuit
from other appliances to avoid overloading the circuit.
8. It is recommended to run the coffee maker for one cycle
with just plain water and no coffee to clean the internal
parts of the coffee maker.
NOTE:
Never remove or
puncture the foil top
of the K-cup capsule
before inserting into
the coffee maker.
Do not touch the lid
during brewing.
After brewing cycle is
complete, wait a
minimum of 10
minutes before taking
out the filter basket to
avoid any injury from
hot steam.
Do not leave used
coffee capsules in
the machine. Wait for
the machine to cool
before removing used
capsules.
NOTE:
This coffee maker
comes with a reusable
mesh filter. A paper
filter can’t be used
in place of reusable
mesh filter.
HOW TO USE
BREWING COFFEE USING K-CUP OR CAPSULE:
1. Place the coffee maker on a dry, level and heat-resistant
surface.
2. Open the top cover and put the K-cup or capsule into
the capsule holder and press down to make sure hole is
punched on the bottom of the capsule.
3. Fill the water tank to the desired level up to 10oz.
according to the markings located on the water gauge.
The recommended amount of water to brew a K-cup
capsule is 8-10oz. DO NOT place any liquid other than
water in the water tank. Close the top cover.
4. Place a mug on the drip tray and under the brew spout.
5. Plug the coffee maker into an electric outlet and turn on
the Power Switch first, then press the Brewing Button to
start the brewing cycle - the indicator light will turn on.
6. To pause/cancel the brewing cycle, switch the red power
to OFF. Otherwise, when the brewing cycle is complete,
the blue indicator light will turn OFF.
7. Allow all the hot coffee to drip from the brewing chamber
into the mug before removing the mug.
-
-
-
-
Caution:
S
calding may occur by open the water tank lid during
the brewing.