Elite Fitness Pursuit Air, Инструкция по сборке

Страница: 19 / 33

19 ELITE PURSUIT AIR BIKE ASSEMBLY MANUAL
3.5 Target TIME mode:
①In Standby mode, press Target Time key then go to mode. TIME will light up, along with a
long sound for 1s.
②TIME value is flashing, press UP and DOWN to adjust value (Figure 39) and press ENTER to
confirm 7, meanwhile, buzzer beeps 1s and TARGET TIME lasting lighting up.
③Pre-set value & workout time switch to display in every 5s until counts down to 0, then
DISTANCE, CALORIES,WATTS, SPEEED, RPM start to count up. (Figure 40)
④Press START button once enter into PAUSE mode; buzzer will sound for 0.5s per second within
30s. All values are displaying on LCD and flashing in every 2s. If continue to stop training for 5
minutes, buzzer sounds 2s and enter to Wake-up mode. Press START to resume workout.
⑤No signal inputs for 30s, buzzer sounds 1 short beep and enter to Wake-up mode.
⑥Press STOP or end up training, TIME will display total workout time; DISTANCE will display total
workout distance; CALORIES will display total consumption during workout; WATT, SPEED and RPM
will switch to display AVG. & MAX. every 5s.
⑦With pulse signal input, PULSE window will display user actual pulse and 65%, 85% MAX
(Figure 21~23). Pulse window displays nothing if no pulse signal input (Figure 19~20).
⑧Press any PROGRAM key then perform the program accordingly.
Figure 39 Figure 40 Figure 41 Figure 42
3.6 Target Distance mode:
①In Standby mode, press Target Distance key and TARGET DISTANCE will light up, along with
a long sound for 1s.
②DISTANCE value is flashing; press UP and DOWN to adjust (Figure 41). Press ENTER to confirm,
meanwhile buzzer beeps 1s and TARGET DISTANCE lasting lighting up.
③Preset value & workout distance switch to display in every 5s until counts down to 0, then TIME,
CALORIES,WATTS, SPEEED, RPM start to count up. (Figure 42)