Elite Fitness COLT, Инструкция по сборке

Страница: 14 / 22

14
COMPUTER
AUTO START / STOP
When exercise starts, the monitor will automatically turn on and display the
progress. When exercise stops, the monitor will automatically turn off after 8
minutes to save energy. Press “MODE” key, will automatically scan Time, Speed,
Distance, Calories, and ODO for every 4 seconds.
DISPLAY:
— Time Display the elapsed time. Max value is up to 99:59
— Speed Display the current speed in miles per hour.
— Distance Display the distance traveled in Miles. Max value is 99.99 miles.
— Calories Display the calorie consumption in cal.
— (ODO) Odometer Display the accumulation of distance from previous and current exercises.
Max value is 9999 miles.
PULSE:
Press MODE button until “PULSE” appears. Before measuring your pulse rate, please placeyour
palms of your hands on Both of your contact pads and the monitor will show your current heart
beat rate in beats per minute(BPM) on the LCD after 6~7 seconds. Remark: During the process of
pulse measurement, because of the contact jamming, the measurement value may be higher than
the virtual pulse rate during the first 2~3 seconds, then will return to normal level.
Note:
Contact Heart rate sensors are for reference only and may provide inaccurate readings as
they are not medically certified devices. If you require accurate heart rate readings for the purpose
of training or a medical condition, please consult your Elite Fitness Sales Professional for further
advice
REPLACE BATTERY:
— Remove the battery cover on the back of the computer.
— Replace two 1.5V (AA) batteries.
— Make sure the batteries are installed correctly and the polarities are correct.
— If the display is not clear or only partial segments appeared, remove the batteries and wait for
15 seconds before re-install them.
— The battery life is approx. 3 months under normal usage.
— When the batteries are removed, all the functional values will reset to zero.
Note:
Please note all values on this computer are approximate and they are for comparison
purpose only. Do not use these values for any medical or rehabilitation purpose.