Elite Core DM-8, Руководство пользователя

Страница: 18 / 20

Elite Core PM-16 User Guide
18
PM-16 System Without a DM-8
A PM-16 can receive audio directly from the IM-16 Input Module and pass it to other PM-16s. How-
ever, each PM-16 must use its own power supply.
To connect PM-16s without a DM-8:
1. Connect a CAT5E cable between the IM-16 Input Module’s
NETWORK
and the PM-16 #1’s
NETWORK IN
connectors.
2. Connect a CAT5E cable between PM-16 #1’s
NETWORK OUT
to the PM-16 #2’s
NETWORK IN.
3. Repeat step 2 until all PM-16s are daisy-chained together.
There is no limit on the number of PM-16s if all use their own power supply.
System with Additional DM-8s
If more than eight PM-16s are required, DM-8s can be daisy-chained together:
1. Follow the directions above to connect a standard PM-16 Personal Monitoring System with
one DM-8, but connect only seven PM-16 Mixers from DM-8 #1.
2. Connect a CAT5E cable between DM-8 #1’s
PoE 8x
output and DM-8 #2’s left
G9
input.
3. Connect additional PM-16s to DM-8 #2.
4. If more than 15 PM-16s are required, repeat step 2 to connect DM-8 #2’s
PoE 8x
output to DM-
8 #3’s left
G9
input.
There is no limit to the number of DM-8s that can be daisy-chained together. Each PM-16 con-
nected to a DM-8 does not require its own power supply.
Using LINE OUT
The
¼
-in TRS
LINE OUT
connectors can route the PM-16’s stereo output to powered speakers/monitors,
wireless IEM systems, amps or other line level devices.
If the headphone output and
LINE OUT
are used simultaneously, set the headphone level first, then
attenuate the powered speakers and/or amps.