“Reverb” :
“Reverb Sends”
Adjust the Reverb level of each
of the 5 channels.
“Delay” :
“Delay Param”
Adjust “Modulation,” “Feedback,”
“Time Offset,” “BPM” Delay Time, and
“Level” of the delay.
“Chorus” :
“Chorus Sends”
Adjust the Chorus level of each of
the 5 channels.
“Chorus” :
“Chorus Param”
Adjust the Depth of the Chorus for
each of the 5 channels.
“Reverb” : “Reverb Param”
Adjust the Decay and Tone of the
Reverb.
“Reverb” : “Delay Routes”
Assign a channel to the delay. Note
that this is an “insert” type effect and
is intended for a selectable single
channel. It precedes the Reverb and
Chorus effects.
Reverb
Reverb
Sends
Ch1
Ch2 Ch3
Ch4
Ch56
Delay
Delay
Param
Mod
Fbck TimX BPM
Lvl
1
120
Delay
Route
Chan
1
Chorus
Chorus
Sends
Ch1
Ch2 Ch3
Ch4
Ch56
BLUETOOTH® FUNCTION
•
To turn ON/OFF Bluetooth® function
PRESS/HOLD down Bluetooth® button for approximately 5 seconds
Both LEDs will flash at the same time
•
To pair device to the speaker system
Bluetooth® needs to be turned ON
QUICK TAP the Bluetooth® button once
Both Flashing LED: indicate Bluetooth
®
is ready to be paired
Flashing Blue LED only: indicate Bluetooth
®
is connected
BLUETOOTH
®
INPUTS CAN BE BE MIXED INTO MAIN AND AUX MIX BY PRESS-
ING THE SEND TO 5//6 SWITCH.