4
Main Part Diagram
Position
Designation
1
On/Off switch
2
Muffler (Air outlet)
3
Air Inlet
4
Vacuum Gauge
5
Filter cartridge
6
Moisture trap
7
Drain valve (Regulator)
Operation
Operating procedure
1.
Press on/off
button to activate the pump after making sure all tubing are well connected.
2.
To setup desired vacuum level adjust by using the regulator
.
* Warning: When pump is used for water filtration, please ensure the liquid level of flask does
not exceed the safety level. Failure to comply could result in serious damage to the pump and
void the warranty. If it occurs, please contact the distributor immediately for service.
Maintenance
How to replace the cartridge
1.
Please replace the cartridge when it is saturated with moisture or particle.
2.
Remove the moisture trap
by rotating it counterclockwise.
3.
Replace the cartridge by the same way.
Vytvořeno: VIJU
Instruction for use ZEPHYRUS® Vacuum Pump
Místo uložení: https://www.elisabeth.cz/produkt-zephyrus-vacuum-pump-cz.html
Tento dokument je majetkem ELISABETH PHARMACON, spol. s r. o. Je určen ke zveřejnění.
Verze: 190620-01
Soubor stažen: 02.07.2020 19:49 online uživatel
Strana 4 z 6
