Elipson A2700, Руководство пользователя

Страница: 39 / 48

EN
39
III. ADDITIONAL INFORMATIONS
LIVE – MAIN PHASE
The phase of the AC power supply can
make a significant difference to the
soundstage in terms of spatialization and
timbre accuracy.
Use a phase tester screwdriver (not
included) to check which Live/Phase pin
is on your power cable.
Make sure that this Live/Phase pin on the
power cable is connected to the right
(Live) pin on the power connector, as
seen from the rear panel:
Live pin
OPERATIONAL TIME
The device is immediately functional when first put into operation. Just set the rear power
switch to On and press the front button, so the center LED turns white. However, this device
will offer an optimal listening quality 30 minutes after it is turned on, the time for the power
and input stages to reach their optimal functional temperature.
RACKING YOUR AMPLIFIER
If you wish to place your amplifier in a rack, you will find optional brackets (2U) specifically
designed for this device.
To mount a bracket, first loosen the two BTR screws on the edge of the device. Let place
the bracket so that it is flush with the front panel. Screw the two BTR screws back into place,
securing the bracket to the device. Proceed in the same way for the opposite bracket.