www.elinz.com.au / [email protected] / 1300 881 773
4.
WIFI Connection
4.1
Press “Add Family”
then set the room or position as per reminders.
4.2 Enter your family name and then
press “Next”
4.3 Input the necessary information just like Country, Province, then press “Done”.
4.4 Press “Add a device” to add a smart device.
4.5 Connect the device with power supply and make sure your mobile phone is
connected to an available Wi-
Fi. Then press “Setup Device”
4.6 After powering on the device, wait for the blue LED and voice prompt. The device is
waiting for pairing, which means your device is in pairing mode.
4.7 If you did not hear the voice prompt, please press the reset button until the blue
indicator lights up and then release. This device will reboot and enter the pairing state.
4.8 The app will input the Wi-Fi name automatically, please input the correct Wi-Fi
Password. Then you can choose the “QR code configuration” or “Sound wave
configuration”