www.elinz.com.au / [email protected] / 1300 881 773
PARTS DESCRIPTION
OPERATION
1. Make sure the soap container is empty and the ON / OFF switch in the OFF position.
2. Be sure to install the batteries the correct way (polarity).
3. Fill the soap container with soap up to the Max mark. Make sure soap does not get
into the battery compartment or inside the product. This could damage the product.
4. Reattach the cover and close tight.
5.
Slide the ON / OFF switch to the “I” (ON) position to turn the product on.
6. Place the product on a solid, level and non-slip surface.
7. Put your hand under the sensor and spout to dispense soap into your hand.
Note:
A white status light will turn on in the soap container while dispensing soap. As
soon as you remove your hand the status light will automatically go off.
(For first time use, repeat this process several times until the soap begins to dispense)
