www.elinz.com.au / [email protected] / 1300 881 773 www.elinz.com.au / [email protected] / 1300 881 773
1. Resolution
- 1296P 1728 x 1296 / 1080FHD 1920 x 1080 / 720P 1280 x 720 three
optional.
- Default setting is 1080FHD 1920 x 1080.
2. Loop Recording
- Off / 1 minute / 3 minutes / 5 minutes four optional.
- Default setting is 3 minutes.
- The files will be saved every 3 minutes if you choose 3 minutes. When the
memory card is full, the new files will cover the old one if the loop
recording is on, if it is off, then the camera won’t work anymore, please
format the SD card or change a new one.
3. WDR (Wide Dynamic Range)
- Default is on.
- Balance light and darkness in driving to get the best image automatically.
4. Record Audio
- Default is on.
- Allows you to enable or disable audio recording with your videos.
5. Date Stamp
- Default is on.
- Stamp the date and time to the videos.
6. G-SENSOR
- Off / low / medium / high four optional.
- Default is low.
- Gravity Sensor means any collision will activate the camera to record, and
the videos will be locked which will never be covered by new files.
- The video is stored as a file every three minutes. When driving, if the road
is bumpy, please adjust it to low or turn off it directly to prevent the
camera doesn’t work because of the memory card is full. When parking,
recommend you adjust it to medium.
1. Date / Time
- Press and
to adjust the date and time, press
to confirm
each option, press to back the settings interface.
2. Parking Monitor (default is off)
- Default is off.
- When there is no power input and the camera has been turned off, the
camera will be turned on automatically and start recording, the video will
be saved and the camera automatic shutdown after 30 seconds.
3. Beep Sound
- Default is on
- Turn on or off the button sound
4. Frequency
- 50HZ / 60HZ two optional
- Default is 60HZ
5. Format
- Every time you insert a SD card, please format it in the camera to ensure
that the SD card is compatible with the camera.
6. Default settings
- Restore the original settings
7. Version
- Check the camera’s version
