6
4.3 Check after the installation
1. Check whether the rear and front handle is smooth, and whether the
key can open the lock latche, otherwise loosen the screws, fine-tune
the handle, and tighten the screws until the latche move freely.
2. Power on check if the lock cylinder work normal.
3. Please follow the voice prompts to register your administrator account.
5. Restoring factory settings
5.1 Factory default
The factory default is set to user experience
mode, PIN code (123456) and any
fingerprint can unlocked.
Default PIN code:
123456
correct
correct
correct
correct
wrong
wrong wrong
wrong
wrong
Fingerprint pattern
Notes
：
1. When the first master account is registered successfully, the user
experience mode is cancelled.
2. When registering an administrator account, please remember the
administrator PIN code you set, otherwise you cannot enter the
setting menu, and factory reset is not available.
5.2 Factory reset
Factory resettings: press number key on the keyboard, after lighting
the keyboard, press then press ,enter the administrator Pin code
and press ,Enter the setting menu and press “5”, factory reset
success.
5.3 User permission
User type
Quantity
Permission Description
Administrator
user
Unlock, lock, close travel mode,
login manage menu to edit the
lock settings
Unlock and lock
General user
1
31
