Pulse Change Mode:
1. Plug the fixture in and press the MENU or UP and DOWN buttons until “ACC -” is displayed.
2. Press the ENTER button to adjust the Pulse speed. Use the UP and DOWN buttons to adjust the
speed. The speed can be adjusted between “AC.00” (slowest) to “AC.12” (fastest).
3. After you have adjusted the pulse speed you can activate strobing by pressing the MENU button
until “FLAS” is displayed and press ENTER. The Flash can be adjusted between “FL.00”
(flash off) to “FL.12” (fastest flash).
Fade Mode:
1. Plug the fixture in and press the MENU or UP and DOWN buttons until “FAde” is displayed.
2. Press the ENTER button to adjust the Fade speed. Use the UP and DOWN buttons to adjust the
speed. The speed can be adjusted between “FA.00” (slowest) to “FA.12” (fastest).
3. After you have adjusted the program speed you can activate strobing by pressing the MENU
button until “FLAS” is displayed and press ENTER. The Flash can be adjusted between “FL.00”
(flash off) to “FL.12” (fastest flash).
Sound Active Pulse Mode:
1. Plug the fixture in and press the MENU or UP and DOWN buttons until “SOUF” is displayed.
2. Press the ENTER button to adjust the sound sensitivity. Use the UP and DOWN buttons to adjust
the sensitivity. The sensitivity can be adjusted between “SF.00” (least sensitive) to “SF.12”
(most sensitive).
3. After you have adjusted the sensitivity you can activate strobing by pressing the MENU button
until “FLAS” is displayed and press ENTER. The Flash can be adjusted between “FL.00”
(flash off) to “FL.12” (fastest flash).
RGBW Dimmer Mode:
1. Plug the fixture in and press the MENU or UP and DOWN buttons until either “rL” (Red),
“gL” (Green), “bL” (Blue), or “uL” (White) is displayed. These are the dimmer modes for each
color. When your find your desired color you would like to adjust press ENTER.
2. Use the UP and DOWN buttons to adjust the output intensity. When you are finished adjjusting
press ENTER.
3. See the System Menu located on the previous page for the various dimmer settings.
4. You can activate strobing by pressing the MENU button until “FLAS” is displayed and press
ENTER. The Flash can be adjusted between “FL.00” (flash off) to “FL.12” (fastest flash).
Red or Green Laser On/OFF:
1. Plug the fixture in and press the MENU or UP and DOWN buttons until either “L1” (Red Laser),
or “L2” (Green Laser) is displayed.
2. Press the ENTER button to enter the On/Off submenu, and use the UP or DOWN buttons to
to turn the lasers either “ON” or OF”. Press ENTER after you have made your desired choice.
3. You can activate strobing by pressing the MENU button until “FLAS” is displayed and press
ENTER. The Flash can be adjusted between “FL.00” (flash off) to “FL.12” (fastest flash).
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com