OPERATION:
UNIVERSAL DMX CONTROL:
This unit allows you to use any universal DMX-512 controller to control head
movement, LED colors, and the shutter (strobe). A DMX controller allows you to create unique programs tai-
lored to your individual needs. Follow the set-up specifications that are included with your DMX controller.
1. The Stealth Wash Zoom has two DMX channel modes; 5 DMX channels and 16 DMX channels.
2. Press the Up or Down buttons until “Chnd” is displayed, and press Enter.
3. Press the Up or Down buttons until your desired DMX channel mode is displayed, and press Enter.
4. Press the Mode button until “AXXX” is displayed.
“XXX” is the current displayed DMX addess.
Press the Enter button.
4. Use the Up and Down buttons to find your desired address and press Enter.
5. Connect your DMX Controller and use the controller’s faders to control the various DMX fixture traits.
6. For longer cable runs (more than a 100 feet) use a terminator on the last fixture.
7. For help operating in DMX mode consult the manual included with your DMX controller.
SOUND ACTIVE MODE:
1. To activate Sound Active mode, press the Up or Down buttons until “SOUN” is displayed, and press Enter.
2. Either “On” or “Off” will be displayed. To activate sound active mode press the Up or Down buttons until
“On” is displayed, and press Enter to select. Press the Menu button to exit
3. To adjust the movement speed in sound active mode press the Up or Down buttons until “SPnd” is
displayed. Either “HISP” (High Speed) or “LoSP” (Low Speed) will be displayed. Use the Up or Down
buttons to switch between the two modes and press Enter to make your selection. Press the Menu button
to exit.
SHOW MODE:
1. To activate Show mode, press the Up or Down buttons until “SHnd” is displayed, and press Enter.
2. 1 of 8 shows will be displayed. Use the Up or Down buttons to scroll through the shows and press Enter
to make your selection. Show 0 runs a random show. Press the Menu button to exit.
MASTER-SLAVE SET UP:
This function will allow you to link up to 16 units together and operate without a
controller. The units can be sound active or in show mode. In a Master-Slave set up one unit will act as the con-
trolling unit and the others will react to the controlling units programs. Any unit can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units together via the XLR connector on the rear of the
units. Remember the Male XLR connector is the input and the Female XLR connector is the output. The
first unit in the chain (master) will use the female XLR connector only - The last unit in the chain will use the
male XLR connector only. For longer cable runs we suggest a terminator at the last fixture.
2. On the Master unit press the Menu button until “SLnd” is displayed, and press Enter. Use the UP and
DOWN buttons to scroll to the “Mast” setting and press Enter. Press the Menu button to exit.
3. After setting the Master unit to the master setting find and set your desired operating mode.
4. On the slave units press the Menu button until “SLnd” is displayed, and press ENTER. Press the Up or
Down buttons until “
SL 1
” and press Enter. Press the Menu button to exit.
5. The slave units will now follow the Master unit.
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
Ad t (OFFSET MENU) -
To enter the Offset Menu, press the Up or Down buttons until “Ad t” is displayed and press Enter. “P000” will
now be displayed. Press the Up button so that the display reads “P018” and press Enter. In this submenu you
are able to adjust the home positions of the pan and tilt motor’s, and focus motor. If you select delete, it will
reset all home positions to “0000”. Press the Menu button to exit.
Ad t:
(Delt) - Selecting this will default all offset values to “0000”.
(P) - Use the Up and Down buttons to adjust the offset of the Pan motor.
(t) - Use the Up and Down buttons to adjust the offset of the Tilt motor.
(F) - Use the Up and Down buttons to adjust the offset of the Focus motor.
