Eliminator Lighting PAR 38B FLOOD (E117), Руководство пользователя

Страница: 10 / 12

10
I N S T A L L A T I O N G U I D E L I N E S
AIMING THE LIGHT SOURCE
Experiment with different angles and distances before mounting light to achieve desired result.
MOUNTING LIGHT SOURCE
Light can be mounted onto a truss using an Eliminator Lighting (not included) clamp, or to a flat
surface using the mounting yoke hole along the inside. Ceiling surface must support 10 times the total
weight of the light.
Please consult a professional for ceiling installation guidance.
ADJUSTING THE AIM
To adjust the aim of the fixture, loosen the 6-point knobs on each side of the yoke by turning counter-
clockwise. Adjust light as needed and tighten knobs by turning knobs clockwise.
GEL FRAME
Gel sheets (optional) can be used to modify the light output of the
PAR-38B FLOOD (E117). To use a gel sheet, slide the gel frame upwards
from the light fixture and place a gel sheet in the frame. Trim the gel sheet
(If desired) and reinstall the gel frame by sliding it back into the fixture.
Mounting
hole