EL2700 IP-Based Access Control System
User Manual
Revision 2.0
10
Holiday
#01 M:00 D:00
Date [DD/MM/YY]
SET SUCCESS!
Time [hh:mm:ss]
07:31:50
The cursor will blank at the day field, you may key in the new value.
When it’s done, the cursor will jump to month field. Enter a new
value and do the same to year field. Weekday will be calculated
automatically based on the date entered. Press <
#
> to save the
setting.
Upon successful of setting, the following screen will be shown
before it is back to Time Menu.
3.3.2
Set Time
The following display is shown when you enter Set Time menu.
Enter hour field with a 2 digit value. The hour value is in 24 hours
format (e.g. 4 p.m is entered as 16 hour). Enter a value for minute
and seconds as well.
Finally, press <
#
> to save the setting. Note that you can press
<
> anytime to abort and return back to Time Menu.
3.3.3
Set Holiday
EL2700 may be programmed to recognize holidays. During holiday,
a different set of time zones may be activated. A total of 20 holidays
may be preprogrammed using Set Holiday Menu as shown below:
Holiday number
(From 1 to 20)
Month value
Day value
*
