ELICA LIEN GOLDEN 604 BL, Инструкция по монтажу и эксплуатации, Страница: 22 / 22

22
Troubleshooting
ERROR CODE DESCRIPTION POSSIBLE CAUSES ERROR REMOVAL
ER03 - the hob turns off
after 10 seconds and
beeps permanently
Permanent pressure on the
command zone
Water or kitchen
utensils on the
command zone
Clean the command
zone
ER47
Communication with the electric
network is faulty (the control panel
switches off - the cooking zones
no longer respond)
The power cable was
incorrectly connected
or is faulty
Disconnect the hob
from the mains and
check the connection
U400
The hob connection is not of the
correct voltage (wrong
connection/overvoltage)
A different voltage is
detected from that of
the connection
Disconnect the hob
from the mains and
check the connection
E2
The command zone switches off
due to too high a temperature
The temperature inside
the electronic parts is
too high
Wait for the hob to
cool before reusing it
E3 Container unsuitable
Loss of magnetic
properties
Remove the pan
ER20,ER22
E5,E6,E8,E9
EA,E/H
Call customer service and report the error code
Customer service
Before contacting Customer Service
1.Check that you cannot solve the problem yourself based on
the points described in "Troubleshooting".
2.Switch the device off and on again to see if the problem
resolves itself.
If, after the above checks, the fault persists, contact the
nearest Customer Service.