ELICA ETR830BL, Инструкция по использованию, уходу и установке

Страница: 9 / 32

9
Replacing the light bulb
CAUTION
Before replacing the lamps, switch power off at service
panel and lock service panel disconnecting means to
prevent power from being switched on accidentally.
NOTE: Turn off the lights and fan. Allow the lights to
cool before handling.
If new lights do not operate be
sure lights are inserted correctly before calling service.
Replacing Lights
- Unscrew the lamp cover and remove it.
- Remove the light bulb by turning it counter clockwise.
- Replace the light bulb with an incandescent 40W/120V
light bulb.
- Screw the lamp cover back in place.
Follow package directions, wear gloves, do not
touch bulb with your bare fingers.
Trouble shooting
Status Method of fixing
Bulb does not light
s up
1. Check for blow
n
bulb
2. Check for damaged control panel
Motor does not work
1. Check connection of power plug
2. Check whether the vane is blocked
3. Lubricate the motor
4. Repair or replace damaged control panel
5. Replace the capacitor
6. Replace the motor
Machine vibrates
when switch
ed
on
1. Fasten the body
2. Check for damaged vanes
3. Check if the vanes are installed well
4. Fasten the motor
Big noise
1. Regulate bob-weight or replace the vanes
2. Check whether some matters drop into the air
chamber.
Weak suction
1. Lower the hood
's installation distance
properly
.
2. Do not open too many windows for improving the
suction environment
3.
Check the duct's installation.
4. Replace the motor and the capacitor
Oil leakage
1.
Check
the body
's
level
2. Replace the sealant
Unworkable cleaning
1. Replace the cleaning
compartment.
2. Replace the control machine