ELICA ESNX43S1, Инструкция по использованию, уходу и установке

Страница: 4 / 36

4
WARNING
Thank you for purchasing a Elica Range Hood.
Please read all the instructions in this manual before installing
the appliance.
Save these instructions for future reference.
Only use this appliance as an exhaust ventilation system for the removal of
cooking vapors. DO NO T use to expel flammable substances or any other materials
or vapors.
The installation procedures in this manual are intended for qualified
installers, service technicians or persons with similar qualified background.
DO NOT attempt to install this appliance yourself.
Ensure that electrical power is turned off at source before commencing
installation. All electrical wiring must be properly installed, insulated and
grounded and conform to all applicable codes and standards.
Make sure all existing duct work is clean of grease build up, or duct work
should be replaced, if necessary, to avoid the possibility of a grease fire.
Check all joints on ductwork to ensure proper connection and all joints should
be properly taped. Be careful when cutting through ceilings or walls not to
damage any hidden pipes or electrical wiring. Ensure your kitchen has
sufficient air return vents to replace the exhausted air.
Fan ducts should always be vented to the outside of your home and never into
spaces within walls, ceilings, lofts or attics. Only use rigid, smooth steel
for ducting. The exhaust point of the blower requires a 6” round connection.