ELICA ECR627SS, Инструкция по использованию, уходу и установке

Страница: 9 / 40

9
• If not already done, install 1/2” conduit connector in j-
box.
Run 3 wires; black, white and green ,according to the
National Electrical Code and local codes and
ordinances, in 1/2" conduit from service panel to
junction box.
Connect black wire from service panel to black or red in
junction box, white to white and green to green-yellow.
Close and secure junction box cover.
• Install the grease filters supporting frame:
a. Lift the frame to cover the blower housing.
b. Secure it to the body of the hood with 6 screws.
Install the grease filter and turn power on at service panel.
Check operation of the hood.
If range hood does not operate:
•
Check that the circuit breaker is not tripped or the house
fuse blown.
• Disconnect power supply. Check that wiring is correct.
To get the most efficient use from your new range hood,
read the “Use and Care Information” section.
Keep your Installation Instructions and Use and Care
Guide close to range hood for easy reference.