9
back to display the internal temperature.
To view your set temperature, press either the
or
button once and LED display will flash set
temperature for 5 seconds.
The appliance has the capability to display temperature in either Celsius or Fahrenheit. To change the temperature
scale, press and hold both
buttons simultaneously for approx. 3 seconds.
Note:
The temperature inside may vary slightly depending on whether or not the interior bulb is ON or OFF and where
the bottles are located (upper/middle or lower section).
ECO mode:
Press and hold the button
for 3 seconds, it can enter or exit ECO mode.
In this mode, the interior LED light, the compressor indicator
and the temperature value on the display panel
will be turned off and the
°
will illuminate on the upper left corner of °C / °F.
Light / Lock
LED lamp brightness mode: with
Memory IC (when unit restarts after power failure unit will auto recover at last
setting)
, the default brightness is 100%.
Each time the button
is pressed, the brightness of the LED will be cycled from the four positions (100%,
75%, 50%, OFF)
Press and hold for 3 seconds to lock or unlock the control panel.
