9
A
B
C
D
A. Cutout
B. See chart below
C. 7¾
´FPFHQWHU
line to cabinet front
D. Centerline
Cabinet Height
Hole Shape and Size
´FP
$ó´GHHS[´ZLGHFP[FP
rectangular opening in the cabinet top is
required for damper transition clearance.
Complete Preparation
,IQRW\HWDWWDFKHGLQVWDOOWKH´FPYHQWWUDQVLWLRQWKH
top of the range hood liner using two 3.5 x 9.5 mm screws.
/RFDWHVLGHPRXQWLQJEUDFNHWÀXVKFPWRWKHERWWRPRIWKH
cabinet side and against the inside of the front cabinet face.
Orient the bracket depending on the width of your cabinet as
GHSLFWHGLQWKHGLDJUDPVEHORZ'ULOOǩ´PPSLORWKROHVLQ
6 places, attach a bracket using three 4.5 x 13 mm screws to
each side of the cabinet, and tighten. Additional washers in
hardware package are supplied as spacers for cabinet walls
WKLQQHUWKDQò´PP
%UDFNHW2ULHQWDWLRQIRU´FP&DELQHW
A
B
C
D
$´FPFDELQHW
%6FUHZV[PP
&:DVKHUVRSWLRQDO
'0RXQWLQJEUDFNHWSRVLWLRQIRU´>FP@FDELQHW
Move the bracket
6
»
16
´FPIURPWKHERWWRP
side of the cabinet
3. Install the vent system according to the method needed.
Use caulking to seal the exterior wall or roof opening.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
range hood.
Failure to do so can result in back or other injury.
1. Using 2 or more people, lift the hood liner into its mounted
location. Attach with four 4.2 x 19 mm screws into the slotted
openings. Do not tighten screws.
A
B
C
A.Cabinet
B.Hood liner canopy assembly
&6FUHZV[PP
2. Center the canopy in the cabinet. Align the bottom of the
canopy with the bottom of the cabinet. Install four 4.2 x 19 mm
screws into the round mounting plate openings and tighten all
PRXQWLQJVFUHZV
3.
5HPRYHWKHPHWDOJUHDVH¿OWHUVIURPWKHIDFHSDQHO6HHWKH
“Range Hood Care” section.
Attach the face plate to the hood insert.
NOTE: If cabinet depth is greater than 12”, it is recommended
WKDWWKHWZR´PHWDOVSDFHUVDUHLQVWDOOHG
Install to front and rear sides of the face plate with 3.5 x 9.5
mm screws as shown in drawing.
C
A
C
B
A.Face Panel
B.Front and rear spacer
&6FUHZV[PP
Install Range Hood
Содержание EAS428SS
Страница 2: ......
