ELGO Electronic EMIX2 series, Руководство по эксплуатации

Страница: 15 / 24

Installation and First Start-Up
- 15 -
5.3 Installation of the Sensor
For mounting the sensor two M3 screws are required. Observe the tolerances stated below.
5.3.1 Mechanical Tolerances
Tolerances
Magnetic tape type MB20-20-10-1-R
Ride height 0.1 mm…max. 0.8 mm
Pitch The maximum distance of 0.8 mm must not be exceeded at any position
Yaw angle +/- 5 °
Roll The maximum distance of 0.8 mm must not be exceeded at any position
Lateral offset +/- 2.5 mm
Figure 6: Tolerances
Ride height
Pitch
Yaw
±0.5°
Roll
Lateral offset
m
ax
0
.8
mm
±2.5 mm
m
ax
0
.8
mm