Elgento E20015, Руководство по безопасности и инструкция

Страница: 7 / 12

7 www.elgento.co
USING YOUR APPLIANCE
1. Plug the toaster to the power supply and
place 1 or 2 slices of bread into the bread
slots of the appliance.
2. Most types of breads can be toasted.
However, ensure that the slice is thin
enough to fit neatly into the bread slot but
not so thick that it becomes jammed, or so
small that it does not rise high enough to be
retrieved easily.
3. The slice should be placed in the centre of
slot.
4. After inserting the bread into the slots,
select the desired darkness setting (toasting
time) by using the Bread Browning Control
(can be adjusted from 1 minimum level to
7 maximum level), and press the Bread
carriage lever down until it locks. The auto-
adjusting bread guides (located inside the
toasting slots) will automatically centre the
bread for even browning. After the desired
darkness setting is reached, the bread will
pop up automatically and the Bread carriage
lever and auto-adjusting bread guides will
return to their original position.
Note: Take care when removing the toasted food
as the surface of the product, the heat elements
and the toasting slots are hot.
Reheat Button
This button allows you to reheat your food
without any extra browning or toasting.
Frozen button
This button allows you to defrost and toast frozen
bread.
Cancel button
The cancel button allows you to stop the toasting
process.
WARNING:
1. Toasted bread can be very hot. Handle with
care.
2. Unplug the cord and move the Bread
carriage lever up and down a few times to
raise “jammed” bread.
3. Never use metal utensils to free bread.
4. Never insert your finger or metallic utensils
into the bread slots or net.
CLEANING AND CARE
After use and before cleaning, unplug the toaster
power cord from the power outlet and wait for the
toaster to cool.
Clean the toaster regularly.
This appliance contains no user serviceable parts
and requires little maintenance.
Leave any servicing or repair to qualified
personnel.
Be sure to empty and clean the crumb tray
regularly.
Cleaning the outside surfaces
Unplug the toaster and allow it to cool completely
before cleaning.
To clean, wipe the exterior with a slightly
dampened soft cloth or sponge and dry with a
cloth or paper towel.
Do not use strong cleaners or abrasives that may
scratch surface, and never spray cleaners directly
onto the toaster.
WARNING:
DO NOT IMMERSE ANY ELECTRICAL PART
OF THE APPLIANCE IN WATER SUCH AS
MOTOR UNITS OR PLUGS.
PLEASE SEE CLEANING SECTION FOR
FURTHER INSTRUCTIONS.