Class 1 Configuration
The wires in the mains lead are coloured
in accordance with the following code:
Green / Yellow: Earth (E)
Blue: Neutral (N)
Brown: Live (L)
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
• The wire which is coloured Green &
Yellow (or coloured Green) must be
connected to the terminal in the plug
which is marked with the letter “E” or
by the earth symbol:
• The wire which is coloured Blue (or
coloured Black) must be connected to
the Neutral terminal which is marked
with the letter “N”.
• The wire which is coloured Brown (or
coloured Red) must be connected to
the Live terminal which is marked with
the letter “L”.
ELECTRICAL SAFETY
Always ensure that the Mains Cord is
fixed into the plug through the Cord
Guard or Cable Clamp, (plug wiring
diagram opposite), and that the Cord
Guard screws are tightened to clamp the
cord (outer sheath and inner coloured
wires) into position in the plug. Make sure
that the plug top is also fitted securely.
This appliance must be protected by a 13
Amp fuse in a 13 Amp type (BS1363) plug.
Should you need to replace the fuse, use
only a 13Amp ASTA approved BS1362
fuse (13A).
It is important to ensure the correct Plug
Adaptor is used when operating in a
country not using the UK 13 Amp socket
system. If in doubt, consult a qualified
electrician.
