Declaration of Conformity
We PFD Ltd declare that this product conforms to all the following product legislation
in accordance with the following directive(s):
2004/108/EEC. The Electromagnetic compatibility Directive
2006/95EC. The LVD directive (Low Voltage Directive)
2002/95/EC. The RoHS. Directive. (Restriction of Hazardous substances Directive)
1935/2004/EC Materials & Articles in Contact with Food. (LFGB section 30, 31 & 35)
Peter Bowden
Quality Assurance Manager
Sutton House, Berryhill Road, Fenton, Stoke-On-Trent,
Staffordshire, UK. ST4 2NL.
Disposal instructions for Elgento items in accordance with the WEEE directive.
Appliances bearing the symbol shown above may not be disposed of in domestic
rubbish. You are required to dispose of old electrical and electronic appliances like
this separately.
Please visit www.recyclemore.co.uk, or www.recy
cl
enow.co.uk for access
to information about the recycling of electrical items. The WEEE directive,
introduced in August 2006, states that all electrical items must be recycled, rather than
taken to landfill. Please arrange to take this appliance to your local refuse centre.
This product is guaranteed for 12 months from the date of the original purchase.
If any defect arises due to faulty materials or workmanship the faulty product must be returned
to the place of purchase. Refunds or replacement are at the discretion of the Retailer .
The following conditions apply:
The product must be returned to the retailer with the proof of purchase.
The product must be installed and used in accordance with the instructions contained in this
instruction guide.
For domestic purposes ONLY.
It does not cover wear and tear, damage, misuse or consumable parts.
PFD has limited responsibility for incidental or consequential loss or damage.
Valid in the UK and Eire only.
GUARANTEE.
DISPOSAL OF UNIT
5
6
ELECTRICAL SAFETY
Class 1 Configuration
The wires in the mains lead are coloured in accordance with the following
code:
GREEN/YELLOW: EARTH (E)
BLUE: NEUTRAL (N)
BROWN: LIVE (L)
Class 1 Configuration
As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as follows:
• The wire which is coloured GREEN & YELLOW (or coloured GREEN) must be
connected to the terminal in the plug which is marked with the letter “E” or by the
earth symbol
• The wire which is coloured BLUE (or coloured BLACK) must be connected to the
NEUTRAL terminal which is marked with the letter “N”.
• The wire which is coloured BROWN (or coloured RED) must be connected
to the LIVE terminal which is marked with the letter “L”.
Always ensure that the Mains Cord is fixed into the plug through the Cord Guard
or Cable Clamp, (plug wiring diagram above), and that the Cord Guard screws are
tightened to clamp the cord (outer sheath and inner coloured wires) into position in
the plug. Make sure that the plug top is also fitted securely.
This appliance must be protected by a 13 Amp fuse in a 13 Amp type (BS1363) plug.
Should you need to replace the fuse, use only a 13Amp ASTA approved BS1362 fuse
(13A).
OPERATIONAL GUIDELINES
It is important to ensure the correct Plug Adaptor is used when operating in a country
not using the UK 13 Amp socket system. If in doubt, consult a qualified electrician.
E14013_IM V1.3.indd 8-9
2/14/2013 8:28:47 AM
