ASSEMBLY
This product is fitted with a safety switch therefore the correct assembly of the product
is important as incorrect assembly will not allow the motor to function.
1.
Ensuring that the base is firmly sitting on
the work top, place the main container on
to the base (Fig. 1.). Ensure the word
“REAR” (which is stamped on the
container) is placed on the opposite side
of the base to the On/Off switch.
2.
With the container correctly seated on the
motor base the actuator retaining channel
will be aligned with the safety switch.
fig.1
3.
Place the actuator in the channel with
the smaller end leading, ensuring that
the double groves are to the outside
on the container (Fig. 2.).
4. Place the peeler or the salad
spinner on the motor unit.
5.
Insert the plug into the wall socket
and switch on at the wall socket.
6. Then switch on at the unit.
fig.2
7
