http://www.elfinx.com
MC-2W
2-Way Motorcycle alar m system
A r m :
Disarm:
Remote Start Engine:
1. Arm/Mute arm:
Press the button once, the siren would beep once , the alarm system is in
ARM mode. If move the motorcycle or ignition on, the siren will sound and the direction lights will
flash, the engine will be locked at the same time. And the remote controller will beep and show
icons in LCD display. Press any button, the icons will be removed.. Press again the lights will
flash once, the motorcycle is in mute arm status. When the motorcycle is moved, the direction
lights will flash and engine will be locked; if turn key to ACC ON, the siren will sound, the direction
lights will flash and engine will be locked. And the remote will beep and show icons as in normal
arm mode.
Fu nction Oper ati on
Fu nction Key
Ke yb o a rd lo c k
Di sarm
Arm
Battery
Assista nt func tion
Se nd ing sig na l
Sho c king a la rm
Sho c king a la rm
Disa rm /Ig initio n o ff
Arm /Anti-ro b b e ry
1
2. Disarm:
Press the button once, the siren would give 2 beeps, the lights would flash twice,
the motorcycle is in the DISARM status.
3. Locate motorr:
Press the button once, the direction light will flash 8 times, the siren will beep 8
times, and you can know where your motorcycle is.
4. Remote Start Engine:
Press the button twice within 3s to start the engine. Press on the
button for 3.5s, turn on the background light. After starting the engine by remote controller, the
engine will be on until you stop it by remote controller. You can drive the motorcycle without using
the key.
5. Adjust Sensitivity:
Adjust the sensitivity on the mainframe by hand, turn clockwise to increase
sensitivity, turn anti-clockwise to decrease sensitivity. The sensitivity has been adjusted well when
leaving factory.
7. Anti-robbery and assistance:
When the motorcycle is robbed and driven away, the owner-
driver can stop it by pressing the button once, the siren will sound urgently and the direction
lights will flash at the same time.
8. Code Learning:
In disarm mode, put the motorcycle key in the key lock and turn it from ACC
OFF to ACC ON, 3 times in 3s, when the lights flash and the siren beeps once, press any button on
the remote controller in 10s, the direction lights will flash once, it means the system learn the
2
