www.elfinx.com
P.4
6. REMOTE ENGINE START
(a.)
Press twice within 3 seconds during arming mode, the engine will be remote started successful.
(b.) If the engine can not be remote started after repeating the above procedure for 5 times just because
for the cold weather or not press twice in 3 seconds, the system will return to alarm condition.
Note: When do the remote engine start for the manual gear car, the gear must be in neutral position
to prevent from some damage.
7. HINTS FOR SUCCESSFUL REMOTE ENGINE START
After successful remote engine start, the direction light will keep on flashing and siren chirp 3 times in
25 seconds later, the direction light will not stop flashing until the car finish warming up.
8. RESET FUNCTION
(In condition of remote lost)
During alarming condition, turn to ‘ON’, the system is triggered. Press RESET switch, the power of the
main unit is cut off. Then release RESET switch, the system return to disarm condition.
9. OVERRIDE SHOCK SENSOR
Pr simultaneously, the siren will chirp once, indicating that the system has change to
override shock sensor status.(The system is set with shock sensor mode during production.)
10. TRUNK RELEASE
Pressing for 3 seconds under any mode.
CENTRAL DOOR LOCK INSTALLATION DIAGRAM
