36
6.11.
For secure mounting to table tops hob should use latches matched surface are
included.
6.12.
When installing the hob above the built-in oven, it is important that the oven
is properly installed. The installation of the oven and the recommended ventilation
clearances must be strictly followed.
7. CONNECTION TO THE POWER NETWORK.
7.1.
For safety reasons, electrical connections for the hob and oven must be made
separately.
ATTENTION!
THE HOB MUST BE NECESSARILY GROUNDED.
ATTENTION!
DO NOT USE ADAPTERS, SPLITTERS, AND/OR
EXTENDERS.
7.2.
Hob connecting to the mains supply must only be carried out by qualified
personnel (namely a specialist of the organization licensed for the right to install and
maintain electrical appliances) in accordance with current standards and local
regulations.
ATTENTION!
WRONG INSTALLATION AND CONNECTION MAY
CAUSE INJURY OR DAMAGE THAT THE
MANUFACTURER SHALL NOT BE RESPONSIBLE FOR
AND WHAT THE WARRANTY DOES NOT APPLY.
7.3.
The hob is of the I class of electrical safety and is designed to be connected to
the power supply 220/380 V, 50 Hz.
7.4.
Before connecting, it is necessary to check the conformity of the electrical
parameters of the hob (the required data is shown on the rating plate located at the
bottom of the appliance) to the mains.
7.5.
The cooking surface must be connected via a safety device with the appropriate
parameters.
7.6
If the appliance is not connected to the mains by a plug, in order to comply with
the safety regulations, this connection must be ensured by means of a disconnector of
all poles (with a distance of at least 3 mm between the contacts of this appliance). The
switch must be in an easily accessible place.
7.7
Wiring diagrams are shown in the picture.
Содержание ALFA 60
Страница 1: ...1 ...
