Page 9
Guardian Bridge Advanced User Manual
Button Behavior
BY ELEXA
LED
Behavior
This happens when…
First LED (Z-Wave)
1st LED Blinking in 500ms Guardian Bridge isn’t in a Z-Wave Network
1st LED Turned Off
Guardian Bridge is included in a Z-Wave
Network
1st LED Flash
1st LED will flash every time that a
Z-Wave transmission happens.
Second LED
(Power)
LED is On
Guardian Bridge is Powered On
Third LED
(Guardian RF)
LED Flashes
3rd LED will flash every time that a
Guardian RF transmission happens.
Action
Condition
Result
Push Button
3x within 1,5
seconds
Always
Guardian Bridge will enter in Learn Mode
(Add/Remove from a Z-Wave Network)
Press and Hold
for 10 seconds
Always
The Guardian Bridge memory will be erased to
factory settings excluding all Associations. This
procedure also sends a Device Reset Locally to
AG01 - Lifeline notification.
Association Groups (AGs)
The Guardian Bridge supports up to 5 Node IDs on AGs. Please see be-
low a description of all available Association Groups:
Association Group 01
Lifeline
This AG sends Binary Report when happens a Valve
Open/Close action.
It also supports a Device Reset Locally.
When any Guardian Leak Detector is wet, the Device
will send a Leak Notification
Association Group 02
This AG supports a Open/Close Basic Report
Association Group 03
This AG supports a Sensor Multilevel Report contain-
ing the Temperature information every 60 seconds
Button Behavior
