For more information regarding the XPD Port, XPD Module, and the
procedure for programming modules refer to the document
“Downloading Firmware to XInC Processors” (Available from Eleven
Engineering).
F. Multiple Systems (Sync Wire):
Multiple SP systems can be
optimally configured together to operate in the same area with minimal
interference by connecting the Rx nodes together via a sync wire. This
wire will synchronize the Rx nodes when in close proximity to effectively
combine each separate Rx node into one cohesive central hub for all SP
wireless instruments on stage. (Maximum number of systems in one area:
8)
a)Photo of multiple units sync-ed together. *
b)Photo of sync wire between Rx nodes.
* Evaluation Kits may or maybe be setup exactly as in photos.
SP
SP-208 Evaluation Kit Operating Instructions
DO4613
www.ElevenEngineering.com
SP-208 Evaluation Kit Instructions
DO4613|
2009.11.05
Page 2/4
