E. XPD Port Interface:
The XInC Programming and Debugging
(XPD) port is used to download firmware hex files to the SP module,
using an XPD Programming Module (available from Eleven
Engineering).
For more information regarding the XPD Port, XPD Module, and the
procedure for programming modules refer to the document
“Downloading Firmware to XInC Processors” (Available from Eleven
Engineering).
F. Multiple Systems (Sync Wire):
Multiple Semi Pro
systems can be optimally configured together to operate in the same
area with minimal interference by connecting the Rx nodes together
via a sync wire. This wire will synchronize the Rx nodes when in close
proximity to effectively combine each separate Rx node into one
cohesive central hub for all SP wireless instruments on stage.
(Maximum number of systems in an area: 8)
a) Photo of sync wire setup between multiple Rx nodes.*
* Evaluation Kits may or may not be exactly as shown in photos.
SP
SP-205 Evaluation Kit Operating Instructions
DO4611
www.ElevenEngineering.com
SP-205 Evaluation Kit Instructions
DO4611|
2009.11.05
Page 2/4
