4
•
Always check for damaged or worn out parts before using the jack.
Broken parts will affect
the jack operation. Replace or repair damaged or worn parts immediately.
•
Do not force the jack
. Do not attempt to lift more than the maximum lifting capacity of 5000-lb.
Where to Find the Correct Location for Installation
For recreational trailer or 5th wheel
：
Step 1a:
Park on level ground. Chock the tires and check the ground clearance.
Step 2a:
From the front corner of the trailer frame, draw a string to the bottom of the front tire. Repeat the
procedure from the rear trailer frame to the bottom of the rear tire as seen in the illustration.
Note:
Anything that extends beyond the lines is at risk of damage or destruction from off-road driving,
entering or exiting driveways, or uneven terrain.
For RV/Motorhome:
S
tep 1b:
Park the RV on level ground and apply the emergency brake. Check for suitable ground clearance
and chock all of the vehicle's tires.
Step 2b:
From the front bumper to the bottom of the front tire, draw a string. Repeat the process drawing a
string from the overhang, or rear bumper to the bottom of the rear tire.
Note:
Any objects that extend past the lines is at risk for damage, destruction, or falling off due to uneven
ground conditions, entering or leaving driveways, or excursions off-road.
When Finding Your Vehicle’s Mounting Placement, check:
1.Ground clearance suitability
2.Jack handle receivers are accessibly placed
3.There is sufficient clearance for other under-frame components
Rev. 210617 1-888-651-3431 Page4
