02/02/22
User Manual HPS/T 62000590_07_
16
3.
NOTES FOR USERS
3.1.
SWITCHING ON
As soon as HPS/T switches on, through the switch placed on the control panel of the machine, it
makes different cycles of test, indicated by the progression of the numbers from 0 to 9 on the
displays.
In case of bad working the test stops and the machine indicates on the control panel the type of
alarm checked (see at the voice alarms).
When the test ends HPS/T is set to 0 Volt in the range 300 Volt, 50 Hertz and regulation on the
output terminals (2 wires).
After the appearing of these indications HPS/T is ready to work.
3.2.
PARAMETERS PROGRAMMING MODE
HPS/T allows you to change various generator start parameters through the programming mode.
The programming mode allows you to configure a starting profile of the application, different from
the factory one.
The modifiable parameters and how to access the programming mode are illustrated in the
Configure parameters quick guide.
3.1.
VOLTAGE MENU
3.1.1.
Setting Voltage
There are two ways to set the Voltage: through the appropriate buttons UP and DOWN placed on
the left on the control panel or through the numeric keyboard.
