41
HMD8 DSP/
USER’S MANUAL
6.4.13
WORK NOTES
The Work Notes panel allows you to capture a snapshot of the whole current configuration. This function makes a
copy of the current configuration to the clipboard.
The images below show the Work Notes panel both when it is empty and when it contains snapshots.
2
1
3
4
Remark:
there is no limit to the number of snapshots that can be captured.
Remark:
if you want to save a configuration contained in a snapshot, you must first reload the configuration by
clicking on the snapshot load button and then use the SAVE AS command located in the top command bar.
Camera button:
allows you to take a snapshot of the current configuration.
Snapshot load button:
allows you to reload the configuration of that snapshot. Each button shows the snapshot
capture time as identification.
Snapshot delete button:
allows you to permanently delete a snapshot.
Help:
to open the user guide.
1
2
3
4
WARNING:
snapshots are volatile and are not saved on the computer: they are only work notes!
When the software is closed, all snapshots are lost.
6
