ELETTROLASER MS 3.5, Руководство пользователя и по обслуживанию

Страница: 24 / 108

code: UMS012 review: 0.2 date: 20/04/2022
Laser Welding machine - MS 3.5
user and maintenance manual page 24 of 102
4.11 Laser safety officer
In many countries, in case of class 3B or 4 laser products, the employer must appoint a LASER SAFETY OFFICER. Consult local laws
in this regard.
4.12 Staff in charge of operating the machine
The machine must be run by a professional operator, as described under paragraph 5.4, which also describes his/her position and
tasks.
The operator must never perform different tasks on the machine than those described for its operation, with the exception of those
described under paragraphs 9.2 (ordinary maintenance) and 9.5 (cleaning the machine); all extraordinary maintenance operations,
repairs or other actions different than those required for operation of the machine are reserved to qualified staff.
PROHIBITION!: Never take the personal initiative of intervening to solve machine downtime situations unless strictly linked to
operating the machinery.
Absolutely do not try to help staff in charge of maintenance or tooling operations.
4.13 Training of staff
The machine can be used exclusively by trained staff that has passed the training period set during the sale contract phase and is
therefore authorized to use the machinery. In any case, the machine cannot be used by personnel that is not adequately trained with
regards to its operation and safety devices.
WARNING!: ELETTROLASER S.R.L. declines any liability deriving from incorrect operations performed by staff not trained to use the
machinery, and from failure to observe general laws on work safety.
4.14 Incorrect use
The machine is designed to be used exclusively for the purposes described in the specific section of this manual (paragraph 5.3).
Different forms of use than those described in this manual are to be considered incorrect and therefore not compliant with safety
laws.
WARNING!: Improper use of the machine can cause personal injuries, death and/or damage to the machine or to equipment. In
particular, it can lead to harmful exposure to laser radiation.
Please find below a series of possible incorrect forms of use which can cause personal injuries or damage to the machine or to
equipment, for which ELETTROLASER S.R.L. refuses to respond and rejects any liability:
•
Unauthorized modifications or replacements of parts of the machine;
•
Failure to observe safety instructions;
•
Failure to observe instructions concerning the installation, use, functioning, maintenance, repairs of the machine or
performance of any of the above by unqualified staff;
•
Use of incorrect or incompatible materials or of auxiliary equipment;
Failure to observe rules or currently effective laws concerning safety in the workplace.