background image

 INSTRUCTION MANUAL FOR DISHWASHERS

 

Page 4 of 14

 

 

UK 

 

 

2.4

 

Water circuit hookup 

The appliance must be connected to its water supply with a flexible hose. A 
shut off valve (cock) must be installed between the water supply line and 
the appliance's solenoid valve. The cock must be close to the appliance. 

 

The  water  supply,  temperature  and  pressure 

must  be  compatible

  with  the  ratings  on  the 

machine's nameplate.

 

  If the hardness of the water is greater than 14 F (8 dH), we recommend using an internal water 

softener (available on request). If the hardness of the water is greater than 35 F (19.5 dH), install 
and external water softener upline of the solenoid valve. 

  If the water has a very high residual concentration of high conductivity minerals, we recommend 

installing a demineralisation system. 

 

 

 

Free drain 

2.5

 

Connection to the drain line 

 

  The drain line must consist of a free drain sump with siphon suited to 

the  flow  capacity  of  the  drain  hose  supplied  with  the  appliance.  The 
hose  must  be  able  to  reach  the  sump  without  stretching,  restriction, 
folding, crushing, pressing or forcing in any way. 

  The tub drains under gravity, so the drain sump must be lower than the 

machine's base. 

 

Max. 

1 m 

 

 

With pump (available on request)

 

  if the drain is not lower than the base of the appliance, you can use the 

version with drain pump (available on request). 

  In this case, the drain connection may be no higher than 1 m. 

  Always check that the drain works properly and is not blocked. 

  Any other solution must be approved by the manufacturer in advance. 

2.6

 

Rinse aid and detergent 

  The  rinse  aid  and  detergent  are  dispensed  by  the  machine's  integral  dispenser  (depending  on 

model). 

  The dose is set by the installer in relation to the hardness of the water, and he also calibrates the 

dispensers themselves. 

 

Before calibrating them, fill the dispenser supply tubes with their respective product.

 

 

The units are calibrated with the adjuster screws, or directly with the control panel (as applicable).

 

  The level of fluid in the container must be sufficient for priming; do not allow it to drain completely 

or top it up with corrosive or impure product. 

 

NEVER use CHLORINE or HYPOCHLORITE based detergents. 
 

We recommend installing an automatic detergent dispenser. 

 
 
 
 
 
 
 
 
 

Содержание MISTRAL 241DE















Отзывы: