- 37 -
When starting up, the “Comfort mode from 6am to
11pm” program is applied to all the days of the week.
To change the programming, turn the knob to PROG.
The 1
st
time slot flashes on and off.
Quick programming:
To apply the same program to the following day, press
and hold the OK button for approximately
3
seconds
until the program of the following day is displayed.
Turn the knob to exit the programming mode.
Programming
Economy mode
for 1 ho
u
r
Comfort
for 1 ho
u
r
Go to the next
progr
a
m ch
a
nge
Confirm
a
nd go to
the next d
a
y
1
s
t
time
s
lot
D
a
y
Ex :
He
a
t mode
Progr
a
m
profile
Time
s
lot
con
su
lted
At the end of the Heat mode programming,
you access the Cold mode programming.
- 36 -
Cool mode:
• If the thermostat controls the heat pump (see star-
ting up, CF07), the frost protection request automa-
tically switches the thermostat and heat pump to
Heat mode and controls the system according to
the Frost Protection setting.
• If the thermostat does not control the heat pump,
the Frost Protection request shuts down the system.
Manually switch the thermostat and heat pump
to Heat mode.
Turn the knob to exit the setting mode.
Economy setting (
)
Turn the knob to
:
Heat mode: setting from 10°C to
3
0°C (16°C by default)
Cool mode: setting from 18°C to
3
5°C (28°C by default)
Press + or - to make your choice.
Turn the knob to exit the setting mode.
Comfort setting (
)
Turn the knob to
:
Heat mode: setting from 10°C to
3
0°C (20°C by default)
Cool mode: setting from 18°C to
3
5°C (24°C by default)
Press + or - to make your choice.
Turn the knob to exit the setting mode.
The setting of the Economy set-point in Cool mode
can only be accessed if CF05=1, see “Starting up”
menu. If CF05=0, the screen displays “- - - -”.